10Gbps XFP Transceiver (MTRX-01X11-G)

* 850nm VCSEL transmitter and Pin photodiode receiver
* XFP Mechanical interface with bail latch and hot pluggable
* XFI High Speed Electrical Interface
* 2-wire interface for management and digital diagnostic monitor
* Low Power Consumption <1.8W, Single +3.3V Power supply
* Operating case temperature: 0 to 70 °C
* All-metal housing for superior EMI performance
* Advanced firmware allow customer system encryption information to be stored in transceiver

View more details at hgxingaoli.com


MTRX-01X11-G is a high performance, cost effective modules, which is optimized for 10G Ethernet, supporting data-rate of 0.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW), and transmission distance up to 300m.

The transceiver consists of two sections: The transmitter section incorporates a 850nm uncooled DML, driver and re-timer. The receiver section consists of a PIN photodiode integrated with a transimpedance preamplifier (TIA) and CDR. The module is hot pluggable into the 30-pin connector. The high-speed electrical interface is base on low voltage logic, with nominal 100 Ohms  differential impedance and AC coupled in the module.

The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver. A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the 2-wire XFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic (DD) data is held in the lower area while specific data is held in a series of tables in the high memory area.


* OIF VSR-4 Serial 10G
* 10GBASE-SR/SW 10G Ethernet
* 10GE ethernet switches and routers
* 10GE SAN applications
* 1200-Mx-SN-I 10G FC


* Compliant with XFP MSA
* Compliant with IEEE 802.3ae-2002
* RoHS compliance

Ordering Information